5 Knuckle Heavy Weight Ball Bearing Pivot Reinforced Hinge Templates
5 Knuckle Heavy Weight Ball Bearing Pivot Reinforced Hinges - Standard Weight
Available Models and Materials (Standard Weight)
|
Steel – polished and plated or phosphated and prime coated for painting
Bronze – polished and plated or painted
Stainless steel – satin finish
|
 |
|
Templates (Standard Weight)
| Hinge | Size | Template | Revision |
Last Updated |
| FBB211 FBB221 |
5" | T50-07 Full Mortise Pivot Reinforced Hinges 5 x 4.5 | B | 2021 |
| FBB212 FBB222 |
5" | T50-08 Full Mortise Pivot Reinforced Hinges for Doors with Square Edge Hinge Stiles 5 x 4.5 | B | 2021 |
| FBB212 FBB222 |
5" | T50-10 Full Mortise Pivot Reinforced Hinges with 4 1/8" Door Plate for Doors with Square Edge Hinge Stiles 5 x 4.5 | B | 2021 |
| FBB213 FBB223 |
5" | T50-09 Full Mortise Pivot Reinforced Hinges for Doors with Beveled Edge Hinge Stiles 5 x 4.5 | B | 2021 |
| FBB213 FBB223 |
5" | T50-11 Full Mortise Pivot Reinforced Hinges with 4 Door Plate for Doors with Beveled Edge Hinge Stiles 5 x 4.5 | B | 2021 |
Maintenance – 5 Knuckle Heavy Weight Ball Bearing Pivot Reinforced Hinges
Keep hinge surfaces clean.
Clean using a soft, damp cloth only.
Do not use chemicals that could damage the protective lacquer coating.
As required, apply Shell Darina #2, or an equivalent grease, to the non-load-bearing center hinge knuckle and pin.
Bearings do not require lubrication, as they contain polytetrafluoroethylene (PTFE).
Lubrication Procedure
Remove the hinge pins.
Wipe or dip the pins in grease.
Reinsert the pins; the grease will work into the load-bearing surfaces.
Wipe away any excess grease and dirt from the hinge.
* Lubrication applies to hinge pins only; bearings are self-lubricating.