Skip to main content

Precision 2000 Series Dummy Touch Bars

  • Updated
Precision 671, 672, N673 & N674 Dummy Touch Bar Exit Devices

 

Click on the Template ID to open the template you wish to view. For installation instructions, click on the drawing number you wish to open.

UL Labels

If your device has a 335L label on it, that is the label for the non fire rated devices.  
If your device has the R7639 label on it, it is fire rated. 

TEMPLATES

Hover over the device template links for more information.

Electrical Options
DS ALK/ALW
  TS/TDS

 

Electrical Options Raceway Template Information 

FOR STANDARD 3′ OR 4′ DOORS: Wide stile device with 2-3/4″ backset: Z = 2-1/4″ Narrow stile device on Aluminum door/frame with 1-1/16 backset: Z = 1-1/16″ Narrow stile device on Hollow metal door/frame with channel cut to 1-1/8″ recommended clearance: Z = 2-1/8″ (For installation with mullion and other backset requirements, add or subtract from dimension shown.)

Technical line drawing showing hinge stile machining for wire routing on a door. On the left, the door edge is illustrated with dimension Z marked and a 1/2-inch reference offset. A note indicates drilling a 5/8-inch diameter hole for wire routing near the end cap. Labels identify the door edge, end cap, and a horizontal reference line with instructions to see the device template. On the right, a partial view of the hinge area is shown with a note stating ‘Power transfer hinge required.

 

DEVICE INSTALLATION INSTRUCTIONS

Document ID Description 
T93625 Dummy Touch Bar Device Installation Instructions
T93625_SP Dispositivo de barra de empuje no funcional - instrucciones de preparación e instalación en la puerta (Spanish)
T93625_FR Dispositif à barre tactile factice - instructions de préparation et d’installation de la porte (French)

 

MISCELLANEOUS INSTRUCTIONS

Drawing ID Description 
T93616 Cylinder Dogging Kit
Mortise Cylinder Required with Straight Cam
(E.G. BEST 1E74-C4)
T93616_SP Instrucciones de dogging mediante cilindro (Spanish)
T93616_FR Instructions pour le maintien du cylindre (French)

 

ILLUSTRATED PARTS CATALOG

Document ID Description 
T83703  Precision 2000 Exit Device Trim and 
Illustrated Parts Catalog

 

 

SPECIFICATIONS 

Dummy touchbar specifications

Specification in Text: 

  • Rigid Dummy Touchbar - Touchbar is rigid. For push/pull operation specify Dummy Trim (02 function), see page 5 for Wide Stile and page 11 for Narrow Still Trims. 

      3-0 Door 4-0 Door 
    Wide Stile 671DR-3 671DR-4
    Narrow Stile N673DR-3 N673DR-4
  • Active Dummy Touchbar with Microswitch - Has an internally mounted switch that is used to signal electromagnetic locks, horns, monitoring stations or other electronic components. For push/pull operation specify Dummy Trim (02 function), see page 5 for Wide Stile and page 11 for Narrow Stile Trims. Available with CD, ALK, ALW, TDS, DS, and NDS options
  3-0 Door 4-0 Door 
Wide Stile TS672DA-3 TS672DA-4
Narrow Stile TSN674DA-2 TSN674DA-4
  • To Order - Specify Device No. x finish (e.g. 672DA-3 x 630) 

Related to

Related articles