5 Knuckle Swing Clear Hinge Templates
5 Knuckle Plain Bearing “Swing Clear” Hinges - Standard Weight
Available Models and Materials (Standard Weight)
|
Steel – polished and plated or phosphated and prime coated for painting
|
 |
Templates (Standard Weight)
Templates are arranged in order by size, smallest to largest.
| Hinge | Size | Template | Revision |
Last Updated |
| F248 | 3 1/2" | T35-05 Full Mortise Swing-Clear Butt Hinges 3 1/2" | B | 2021 |
| F248 | 4' | T40-05 Full Mortise Swing-Clear Butt Hinge 4" | B | 2021 |
| F248 | 4 1/2" | T45-30 Full Mortise Swing-Clear Butt Hinges 4 1/2" | B | 2021 |
5 Knuckle Concealed Bearing “Swing Clear” Full Mortise - Standard Weight
Available Models and Materials (Standard Weight)
|
Steel - polished and plated or phosphated and prime coated for painting
Stainless Steel - highly polished or satin finish
|
 |
Templates (Standard Weight)
Templates are arranged in order by size, smallest to largest.
| Hinge | Size | Template | Revision |
Last Updated |
| CB248 STSCB248 |
4 1/2" | T45-30 Full Mortise Swing-Clear Butt Hinges 4 1/2" | B | 2021 |
5 Knuckle Concealed Bearing “Swing Clear” Full Mortise - Heavy Weight
Available Models and Materials (Heavy Weight)
|
Steel – polished and plated or phosphated and prime coated for painting
|
Stainless Steel – highly polished or satin finish
|
Templates (Heavy Weight)
Templates are arranged in order by size, smallest to largest.
| Hinge | Size | Template | Revision |
Last Updated |
| CB268 STSCB268 |
4 1/2" | T45-31 Full Mortise Swing-Clear Butt Hinges 4.5 | B | 2021 |
| CB268 STSCB268 |
5" | T50-05 Full Mortise Swing-Clear Butt Hinges 5 | B | 2021 |
| CB278 STSCB278 |
4 1/2" | T45-36 Full Mortise Swing-Clear Butt Hinges for Doors with Beveled Edge Hinge Stile 4 1/2" | B | 2021 |
| CB278 STSCB278 |
5" | T50-12 Full Mortise Swing-Clear Butt Hinges for Doors with Beveled Edge Hinge Stile 5 | B | 2021 |
| CB269 STSCB269 |
5" | T50-85 Half Surface Swing-Clear Hinges 5 | B | 2021 |
| CB264 STSCB264 |
5" | T50-45 Half Mortise Swing-Clear Hinges for Doors with Square Hinge Stiles 5 | B | 2021 |
| CB274 STSCB274 |
5" | T50-47 Half Mortise Swing-Clear Hinges for Doors with Beveled Hinge Stiles 5 | B | 2021 |
| CB266 STSCB266 |
5" | T50-65 Full Surface Swing-Clear Hinge 5 | B | 2021 |
Maintenance – 5 Knuckle Swing Clear Hinges
Keep hinge surfaces clean.
Clean using a soft, damp cloth only.
Do not use chemicals that could damage the protective lacquer coating.
As required, apply Shell Darina #2, or an equivalent grease, to the non-load-bearing center hinge knuckle and pin.
Bearings do not require lubrication, as they contain polytetrafluoroethylene (PTFE).
Lubrication Procedure
Remove the hinge pins.
Wipe or dip the pins in grease.
Reinsert the pins; the grease will work into the load-bearing surfaces.
Wipe away any excess grease and dirt from the hinge.
* Lubrication applies to hinge pins only; bearings are self-lubricating.