Why does the Arm-A-Dor alarm sounds when I arm my unit and the door in the locked position?

Why does the Arm-A-Dor alarm sound when the door is locked?

Answer

The Arm-A-Dor needs resetting. A microswitch may be misaligned or malfunctioning.

1. Please reset the Arm-A-Dor. 
2. Check all three microswitches: one under each end cap and one on the subassembly near the circuit board.
3. Verify the end cap microswitches are intact.
4. Remove the push bar to access the subassembly microswitch. Ensure its actuator engages correctly when the door is locked.

Applies To

ARM-A-DOR