Answer
LED setting 6 indicates full open or hold open. If the door drifts closed, follow these steps:
- Switch the door to hold open mode using the side switch on the operator.
- Adjust POT 4 until the door remains stationary.
- Return the operator to day mode and retest the door.
Digital Readouts:
- 01 – Initialization
- 02 – Door closed
- 03 – Electric strike enabled (DIP switch 2)
- 04 – Door moving open
- 05 – Door moving through back-check
- 06 – Full open / hold open
- 07 – Door moving closed
- 08 – Door obstructed (moving open only)
POT Adjustments:
- POT 1 – Hold-open time (5–30 seconds)
- POT 2 – Full open position (adjust door swing range)
- POT 3 – Not used
- POT 4 – Stall force (adjust if door drifts closed in hold open)
- POT 5 – Open check speed (controls speed during back-check)
- POT 6 – Open sweep speed (adjust if door opens too fast or slow)
- POT 7 – Opening torque (adjust force; door should stop if obstructed and easy to stop manually)
|