Skip to main content

Precision 2000 Series Illustrated Parts Breakout Catalog

  • Updated

 

Precision 2000 Series Illustrated Parts Catalog

Click below to download the parts catalog for the Apex 2000 series devices. 

T83703 - Precision 2000 Exit Device and Trim Illustrated Parts Catalog

Frequently Requested Part Numbers
Manufacture Part Number Description Image
00115-52 Hex Key Dogging Bracket Black-and-white line drawing of a Hex Key Dogging Bracket, a U-shaped hardware component with a rounded top and open bottom. The top surface has a centered circular hole for mounting, and the lower inside edge includes a short protruding tab.
DK220 7/32 Dogging Key Black-and-white line drawing of a 7/32-inch dogging key, a metal tool with a straight shaft and a curved hook-shaped end forming an almost complete circle. Used for dogging exit devices
00385-89 Latchbolt Spring - 2100 Device Black-and-white line drawing of a Latchbolt Spring for a 2100 exit device. The spring is shown as a tightly coiled cylindrical metal component, designed to provide tension for the latchbolt mechanism
00146-89 Deadlock Release Spring - 2100 Device Black-and-white line drawing of a small coiled metal spring with tightly wound loops forming a cylindrical shape. Each end of the spring has an extended hook-like arm curving outward, indicating attachment points
01855-03 8ft Top Rod SVR - 2200 Device (TR1855-finish) Black-and-white line drawing of an 8-foot top rod for a surface vertical rod (SVR) exit device. The rod is shown in two separate sections aligned vertically, each depicted as a long, narrow cylindrical tube with open ends. The upper section includes two small circular holes near one end, indicating attachment or adjustment points
00300-008 S300 Strike Kit Black-and-white line drawing of an S300 Strike Kit, showing multiple components arranged separately. The kit includes two rectangular strike plates with rounded corners and mounting holes, one central strike housing with a recessed cavity, six screws, and two washers.
TSK309 Touchbar Monitoring Switch (RQE) Black-and-white line drawing of a two-piece hardware component. The upper piece is a rectangular block with rounded edges, featuring a central cutout shaped like a keyhole and two protruding cylindrical connectors on the underside. The lower piece is a curved bracket with an open slot, designed to fit around the upper component.
01303-03 Fire Bolt FB277 “Illustration of a Fire Bolt FB277 assembly showing two parts: a circular retaining clip with tabs positioned above a cylindrical bolt housing with a rectangular mounting plate and screw holes.
CM150-08 ELR Control Module Card Black-and-white line drawing of an ELR control module card. The rectangular circuit board features multiple components, including two large rectangular blocks near the center, several small circular elements arranged in rows, and a series of terminal connectors along the top and bottom edges. A black connector strip is visible on the left side
05214-56 Black Resistor Pack for ELR 150-08 Power Supply Black silhouette drawing of a resistor pack with an elongated oval center and two thin curved wires extending from opposite ends, forming a simple inline component shape.
8WTCM TCM - Temperature Control Module for E Lock Black-and-white line drawing of a slim, rectangular module positioned horizontally with rounded ends. Two wires extend from opposite sides of the module, one curving downward and the other upward, indicating electrical connections.

 

Related to

Related articles