• Catalog
• Templates
• Instructions
• Specifications

 This article provides complete resources for the E Series Mortise and Rim Cylinders.
 It includes series templates, installation instructions manuals, and specifications.
 

E Series Cylinder Templates & Installation Instructions

Series Templates

Click on the blue template ID of the template you wish to download.

Specifications

E Series Cylinders

Special Length Mortise Cylinders Specifications 

Diameter: 1 - 5/32"
Material: Solid brass or bronze 
Cam: Standard 1E-C4 cam supplied unless otherwise specified
Rings: The RP2 (for 6 pin) and RP3 (for 7 pin) package are supplied standard unless otherwise specified.
Length : 1-3/8'', 1-1/2,'' 1-5/8'', 1-3/4'', 1-7/8'', 2'', 2-1/8'', 2-1/4'', 2-1/2'', 2-3/4'', 3'', 3-1/2'', 4'', 4-1/2'', 5'', 5-1/4'', 6''

1-1/2" Diameter Mortise Cylinder Specifications

Diameter: 1-1/2"
Length : 6 pin: 1-1/8" ; 7 pin: 1-1/4" 
Door thickness: 
    6 pin: 1-5/8" to 2-1/4" (includes trim) 
    7 pin: 7/8" to 2-1/2" 
Material: Solid brass or bronze 
Cam: Standard 3E-C3 cam supplied unless otherwise specified. 
Rings: The RP4 ring package is supplied with 3E cylinders. 
          This package includes a 3E-R2 (1/8") and a 3E-R4 (1/4") ring. 
Options: 
    3E-04-Dummy
    3E-7A4-Turn knob
    3E-7B4-Dust Cover. 
    Adaptor ring to allow 1E74 cylinders to fit a 3E tapped hole: A26139.
 

Dummy Mortise and Rim Cylinders Specifications

Diameter: 1-5/32" 
Length : Mortise: 1-1/8" ; Rim: 1-1/8" 
Material: Solid brass or bronze 
Cam: Standard 3E-C3 cam supplied unless otherwise specified. 
Rings: Ring packages are supplied standard as follows:
  Mortise – RP2 ring package 
  Rim – RP3 ring package (see page 3)

Taper Head Mortise Cylinder Specifications

Diameter: 1-5/32" 
Length:  6 pin: 23/32" to 3/4" 
Door thickness : 
    6 pin: 1-3/8" to 1-3/4" (including trim) 
    7 pin: 1-3/8" (including trim) 
    7 pin: 1-3/4" (without trim) 
Material: Solid brass or bronze 
Cam: Standard 1E-C4 cam supplied unless otherwise specified.
Rings: The RP1 ring package is supplied standard with all 1E taper cylinders

Turn Knob Cylinders Specifications

Diameter: 1-5/32" 
Length: 6 pin: 1-1/8"; 1EA6A4, Mortise ADA 
Rim : 6 pin: 1-3/16"; 1EA6A2, Rim Std 6 pin: 1-3/16"; 1EA6A1, Rim ADA 
Material: Solid brass or bronze 
Cam: Standard 1E-C140 cam supplied unless otherwise specified. 
Rings: Ring packages are supplied standard as follows (unless otherwise specified): Mortise 6 pin: RP2 ring package 

Mortise and Rim Cylinders with Dust Covers Specifications

Diameter: 1-5/32" 
Length : 6 pin: 1-1/8; 7 pin: 1-9/32" 
Rim: 6 pin: 1-3/16"; 7 pin: 1-11/32" 
Material: Solid brass or bronze Cam – Standard 1E-C4 cam. 1E series supplied unless otherwise specified.
Rings: Ring packages are supplied standard as follows (unless otherwise specified): 
    Mortise 6 pin: RP2 ring package
    Mortise 7 pin: RP3 ring package
    Rim 6 and 7 pin: RP3 ring package 

Mortise Cylinder Direct Motion Cam Specifications

Diameter: 1-5/32", slabbed, threaded to the head 
Length: 6 pin: 1-5/16" ; 7 pin: 1-15/32" from head to cam 
Material: Solid brass or bronze Cam – C228 - cabinet cylinder cam standard. Cam prevents the key from being withdrawn in the unlocked position. 
Rings: The RP2 ring package is supplied standard for 6-pin and 7-pin unless otherwise specified

Standard Mortise Cylinder Lost Motion Cam Specifications

Diameter:1-5/32" 
Length : 6 pin: 1-1/8" ; 7 pin: 1-1/4" 
Material: Solid brass or bronze 
Cam: 1E-C230 - cam supplied standard 1E-C230 is cam 1E-C4  set up for lost motion. Specify cylinder handing as for the hand and side of the door. RHO (Right Hand Outside); RHI (Right Hand Inside); LHO (Left Hand Outside); LHI (Left Hand Inside). 
Rings: The RP2 ring package is supplied standard for 6-pin and 7-pin unless otherwise specified 

Square Head Mortise Cylinder-Wrench Resistant For use in Narrow Stile Doors Specifications

Diameter: 1-5/32" 
Length: 6 pin: 1-1/4"; 7 pin: 1-13/32" 
Material: Solid brass or bronze 
Cam: SAs specified on order
Rings: Package includes a special 5/8" slip ring

Slabbed Cabinet Mortise Cylinder Lost Motion Cam Specifications

Diameter: 1-5/32" 
Length: 6 pin: 1-1/8" (effective length); 7 pin: 1-1/4" (effective length) 
Material: Solid brass or bronze 
Cam: C229- cam supplied unless otherwise specified (1E-C229, when ordered separately from unit). Specify hand: RH or LH 
Rings: The RP2 ring package is supplied standard for 6 and 7-pin unless otherwise specified 

Hotel/Motel Mortise Cylinder Shifting Cam Specifications

Diameter: 1-5/32" 
Length : Mortise 6 pin: 1-5/16" ; 7 pin: 1-5/32" 
Material: Solid brass or bronze Cam – SC258 or cam supplied as specified.
Rings: The RP2 ring package is supplied standard for 6-pin and 7-pin unless otherwise specified