Skip to main content

What is the minimum stile width that the QED200 can accommodate?

  • Updated

What is the minimum stile width that the QED200 can accommodate?

The minimum stile width is 2” for surface vertical rod devices and rim devices using the ALS strike. 
It is 3 ½” for concealed vertical rod devices and rim devices using the HMS strike. 
Therefore, you must specify if you require an Aluminum Door Strike (ALS) or a Hollow Metal Door Strike (HMS) when ordering a QED200.

Applies To

QDC200 and QDC300 Door Closer and Door Cover

Product image of a QED200 exit device in a brushed metal finish, shown in a three-quarter view. Red callout labels identify key features including BHMA/ANSI Grade 1 certification, a lifetime mechanical warranty, non-handed and field-sizeable design, availability in rim, surface vertical rod (SVR), and concealed vertical rod (CVR) configurations, a minimum 2-inch stile width, and styling consistent with the product portfolio. The push bar and latch assembly are visible at the front. Accessibility, UL Listed, ANSI, and BHMA certification logos appear along the bottom.

Image titled “QET200 Exit Trims” showing five exit trim options in a brushed metal finish, arranged from left to right. The trims include lever and pull plate styles labeled QET230A626, QET260E626, QET260M626, QET225L626, and QET290L626. The first three trims feature vertical plates with lever handles, while the last two are flat plate and pull handle styles. A caption below notes that QET200 lever, pull, and flat plate exit trims are available.

Related to

Related articles